Difference between revisions of "Portable Tool and Engineering Co"
| Line 1: | Line 1: | ||
'''Portable Tool and Engineering Co''' of Enfield Highway, Middlesex | '''Portable Tool and Engineering Co''' of Enfield Highway, Middlesex | ||
1919 Made an inserted tooth facing and bossing cutter invented by [[H. Francis]] and [[Vickers]] which was used in the [[National Shell Factories|Ponders End Shell Factory]]<ref>The Engineer 1919</ref> | 1919 Made an inserted tooth facing and bossing cutter invented by [[H. Francis]] and [[Vickers]] which was used in the [[National Shell Factories|Ponders End Shell Factory]]<ref>The Engineer 1919</ref> | ||
1919 The '''Duzmo''' was designed by [[John Wallace]] and was an uncompromising sportsman’s machine. His engine, advanced in design, was a 492cc ohv single-cylinder with a detachable head, aluminium piston and pressure lubrication. It had direct belt-drive and conventional cycle parts. | 1919 The '''Duzmo''' motorcycle was produced from 1919 to 1924; it was designed by [[John Wallace]] and was an uncompromising sportsman’s machine. His engine, advanced in design, was a 492cc ohv single-cylinder with a detachable head, aluminium piston and pressure lubrication. It had direct belt-drive and conventional cycle parts. | ||
1920 A prototype 8hp ohv 50-degree V-twin in competition trim was built that year, and was a double-up of the single. The machine’s success soon swamped the original company and they sold out to Wallace, who continued alone apart from assistance in development from his old friend, [[H. le Vack]]. A '''Duzmo''' was entered in the Senior TT, without success. | 1920 A prototype 8hp ohv 50-degree V-twin in competition trim was built that year, and was a double-up of the single. The machine’s success soon swamped the original company and they sold out to Wallace, who continued alone apart from assistance in development from his old friend, [[H. le Vack]]. A '''Duzmo''' was entered in the Senior TT, without success. | ||
Latest revision as of 08:54, 13 November 2015
Portable Tool and Engineering Co of Enfield Highway, Middlesex
1919 Made an inserted tooth facing and bossing cutter invented by H. Francis and Vickers which was used in the Ponders End Shell Factory[1]
1919 The Duzmo motorcycle was produced from 1919 to 1924; it was designed by John Wallace and was an uncompromising sportsman’s machine. His engine, advanced in design, was a 492cc ohv single-cylinder with a detachable head, aluminium piston and pressure lubrication. It had direct belt-drive and conventional cycle parts.
1920 A prototype 8hp ohv 50-degree V-twin in competition trim was built that year, and was a double-up of the single. The machine’s success soon swamped the original company and they sold out to Wallace, who continued alone apart from assistance in development from his old friend, H. le Vack. A Duzmo was entered in the Senior TT, without success.
1921 The engine had design changes and in the autumn of that year the production V-twin arrived. It had all-chain drive and a Sturmey-Archer gearbox but, surprisingly, a single-speed belt-driven option was also available. Once again two machines were entered in the TT, but both retired early.
1923 Le Vack had, by now, moved on to JAP and the Duzmo name (said to be the corruption of 'Does More', as in mph) began to fade from the limelight. Only the single survived.
1924 The revised-frame version of the single continued with the engine sloped slightly forward. It had a dropped top tube and a three-speed Sturmey-Archer all-chain set up. John Wallace was then forced into liquidation but the Duzmo name ran on for a while as D. J. Shepherd and Co became sole manufacturers at the Enfield Highway address from February.
See Also
Sources of Information
- ↑ The Engineer 1919
- The British Motorcycle Directory - Over 1,100 Marques from 1888 - by Roy Bacon and Ken Hallworth. Pub: The Crowood Press 2004 ISBN 1 86126 674 X
- The Encyclopedia of the Motorcycle by Peter Henshaw. Published 2007. ISBN 978 1 8401 3967 9