Grace's Guide To British Industrial History

Registered UK Charity (No. 115342)

Grace's Guide is the leading source of historical information on industry and manufacturing in Britain. This web publication contains 162,259 pages of information and 244,500 images on early companies, their products and the people who designed and built them.

Grace's Guide is the leading source of historical information on industry and manufacturing in Britain. This web publication contains 147,919 pages of information and 233,587 images on early companies, their products and the people who designed and built them.

KRM

From Graces Guide
Revision as of 06:28, 14 June 2011 by Ait (talk | contribs)
KRM Motorcycle.

KRM were the initials of Kingston Racing Motors of Hull, who produced a motorcycle in 1973.

Early in 1973 a racing four was exhibited at a London show. Typically in the style of the period, it had the cylinders inclined forward, dohc, four carburettors, four exhaust pipes with megaphones and Lumenition electronic ignition. The crankcase was split horizontally and the crankshaft ran on six plain bearings, and there were plain big-ends. A centre gear drove a countershaft, there was chain-drive to the camshafts, the ignition rotor and a distributor mounted on their ends.

The engine and gearbox hung from a tubular spine frame with conventional suspension. It had wire wheels and disc brakes front and rear. Fitted with a fairing, the machine was advertised as the Silver Streak.

The KRM motorcycle did race at brands hatch in 1973

The overall impression was one of a very bulky machine and nothing further was heard of it.


Contributed by PS on 13th June 2011

The KRM 350 (Kingston Racing Motorcycles) was designed by Jack Williams (Matchless G45 and AJS7R), the father of the TT racer Peter Williams who was seriously injured when his seat tank unit came off. Twin overhead cams, four cylinder, four stroke with ram air engine cooling. It had four Amal carburetors. It couldn't compete against the TZ350's and especially not when noise regulations restricted the previously open exhaust pipes. I suspect this is one of the few picture in existence. Tony Rutter once test rode it at Wellesbourne on a very cold day in about 1976. It was never raced at Brands Hatch. Originally it had wire wheels, these were soon replace with mag alloys. The Silver Streak tag was dropped. By 1978 the project was shelved. We mostly tested it at either Brands Hatch (where it collected the damage to the fairing, exiting Druids Bend) or Snetterton. Philip Sinclair was one of the test riders.

See Also

Loading...


Sources of Information

The British Motorcycle Directory - Over 1,100 Marques from 1888 - by Roy Bacon and Ken Hallworth. Pub: The Crowood Press 2004 ISBN 1 86126 674 X