Difference between revisions of "Ferranti"
m |
|||
(229 intermediate revisions by 9 users not shown) | |||
Line 1: | Line 1: | ||
[[Image: | [[image:Im1889v68-p365.jpg|thumb| 1889. Alternator and exciter. ]] | ||
[[Image: | [[Image:JD Ferrnati cable01Copy.jpg|thumb|Section of the original 10,000V cable and the spike which was driven through it in 1890 to demonstrate its safety. Stored in a display case in the reserve collection at [[Manchester's Museum of Science and Industry]] in 2014]] | ||
[[image:JD 2013 Amberley A11.jpg|thumb|Section of one of the original cables installed in 1890 for the 10,000V Deptford-London cable, on display at [[Amberley Working Museum]]]] | |||
[[image:JD 2013 Amberley A05.jpg|thumb|Close-up of original cable joint at [[Amberley Working Museum]]]] | |||
[[Image:Im1893EnV76-p49.jpg|thumb| 1893. 300 hp alternator. Barcelona Electricity Supply.]] | |||
[[Image:Im1894EnV78-p104.jpg|thumb| 1894. Machinery Hall, [[Portsmouth Electric Supply Works]].]] | |||
[[Image:Im1895EnV80-p502.jpg|thumb| 1895. 1000 kW alternator for the [[Deptford Generating Station]] of the [[London Electric Supply Corporation]].]] | |||
[[image:Im1897Ev63-p005.jpg |thumb| 1897. Combined engine and alternator at Bolton. Engine by [[Hick, Hargreaves and Co]]]] | |||
[[Image:JD_Ferranti01.jpg|thumb|Ferranti steam engine at [[Manchester's Museum of Science and Industry]] ]] | |||
[[Image:Im190102Cass-Ferr.jpg|thumb| February 1901. Compound Engine. ]] | |||
[[image:Im1906EnV102-p168a.jpg|thumb| 1906.]] | |||
[[image:Im1906EnV102-p168b.jpg|thumb| 1906.]] | |||
[[image:Im1906EnV102-p169a.jpg|thumb| 1906.]] | |||
[[image:Im1906EnV102-p169b.jpg|thumb| 1906.]] | |||
[[image:Im1906EnV102-p169c.jpg|thumb| 1906.]] | |||
[[image:Im1906EnV102-p169d.jpg|thumb| 1906.]] | |||
[[image:Im1906EnV102-p172a.jpg|thumb| 1906.]] | |||
[[image:Im1906EnV102-p172b.jpg|thumb| 1906.]] | |||
[[image:Im1906EnV102-p172c.jpg|thumb| 1906.]] | |||
[[image:Im1906EnV102-p172d.jpg|thumb| 1906.]] | |||
[[Image:Im191102Cass-Ferr.jpg|thumb| February 1911. ]] | |||
[[Image:Im1912IM-Fe.jpg|thumb| 1912. Ironclad Fuses. ]] | |||
[[image:Im19130412IM-Ferranti.jpg |thumb| 1913. ]] | |||
[[Image:Ferranti Instruments 1921MI.jpg|thumb| 1921. ]] | |||
[[Image:Ferranti meter 1921HS.jpg|thumb| 1921. ]] | |||
[[Image:Im1926EYB-Ferranti.jpg|thumb| 1926. ]] | |||
[[image:Im1929BIF-Ferranti.jpg|thumb| 1929. ]] | |||
[[image:Im193105GHK-Ferranti.jpg|thumb| May 1931. ]] | |||
[[Image:Im1931v151-p45.jpg |thumb|1931. Clip-on Ammeter. ]] | |||
[[Image:Im1933EnV156-p512a.jpg |thumb|1933.Tail End Booster. ]] | |||
[[Image:Im1933EnV156-p513a.jpg |thumb|1933. Tail End Booster, Removed from Case. ]] | |||
[[Image:Im1933EnV156-p656.jpg |thumb|1933. Single and Three Phase Moving Coil Regulators. ]] | |||
[[image:Im1942EnV173-p069a.jpg|thumb| 1942. Moving coil regulator.]] | |||
[[image:Ferranti 1945MM.jpg|thumb| February 1945. ]] | |||
[[image:Ferranti 1946ET.jpg|thumb| September 1946. ]] | |||
[[image:ImEnV183-p352a.jpg|thumb| 1947. Thunderstorm recorder.]] | |||
[[Image:Im194906WW-Ferr.jpg |thumb| June 1949. ]] | |||
[[Image:Im1950BIF5-Ferranti.jpg|thumb| 1950. ]] | |||
[[Image:Im1950BIF5-Ferranti2.jpg|thumb| 1950. ]] | |||
[[Image:Im195112WW-Ferr.jpg|thumb| December 1951. Cathode Ray Tubes. ]] | |||
[[Image:Im195309ERT-Ferra.jpg|thumb| September 1953. ]] | |||
[[Image:Im195309ERT-Ferranti.jpg|thumb| September 1953. 2-Volt television Tubes. ]] | |||
[[image:Im1954v198-p565.jpg|thumb| 1954. Edinburgh Works.]] | |||
[[Image:Im1955RS-Ferr2.jpg|thumb| 1955. ]] | |||
[[Image:Im1955RS-Ferr1.jpg|thumb| 1955. Valves and television tubes.]] | |||
[[Image:Im195506WW-Ferr.jpg|thumb| June 1955. Valves. ]] | |||
[[image:Im1956EnVCen-p210.jpg |thumb|1956 Electronically controlled milling machine. ]] | |||
[[Image:Imv208-p137.jpg |thumb| 1959. Precision Milling Machine with Ferranti Three Dimensional Control Equipment. ]] | |||
[[Image:Imv208-p786.jpg |thumb| 1959. 3 ton [[Birlec]] arc furnace at the Hollinwood Works.]] | |||
[[image:Im1960v209-p16hh.jpg |thumb| 1960. The "Tapemaster". ]] | |||
[[image:Ferranti 1961CP.jpg|thumb| 1961. Cone-Plate Viscometer]] | |||
[[Image:Im19610318ILN-Ferr.jpg|thumb| 18th March 1961.]] | |||
[[image:Im19620208Aero-Ferranti.jpg |thumb| Feb 1962.]] | |||
[[Image:Im1973IME-Ferranti.jpg|thumb| 1973. EP210 Freescan Digitiser. ]] | |||
[[Image:Im1976SERT-Ferr.jpg|thumb| 1976. Avionics. ]] | |||
[[Image:Im1982EP-Ferranti.jpg|thumb| 1982. ]] | |||
[[Image:Im1982EP-Ferranti2.jpg|thumb| 1982. ]] | |||
[[image:Im1983Eg-Ferranti2.jpg |thumb| 1983.]] | |||
[[image:Im1983Eg-Ferranti.jpg|thumb| 1983.]] | |||
[[image:Im1983BEg-FerrantiCetec.jpg |thumb| 1983.]] | |||
[[image:Im1983BEg-Ferranti2.jpg |thumb| 1983.]] | |||
[[image:Im1983BEg-Ferranti.jpg |thumb| 1983.]] | |||
[[Image:Im1984EP-Ferr.jpg|thumb| 1984. Transformers. ]] | |||
[[Image:Im1984EP-Ferr2.jpg|thumb| 1984. Transformers. ]] | |||
[[Image:Im1988IEER-Ferr.jpg|thumb| 1988. ]] | |||
of Hollinwood, Lancashire. Telephone: Failsworth 161; City 7618 and Central 9325. Cables: "Ferranti, Hollinwood"; "Ferranti, Estrand, London". (1929) | of Hollinwood, Lancashire. Telephone: Failsworth 161; City 7618 and Central 9325. Cables: "Ferranti, Hollinwood"; "Ferranti, Estrand, London". (1929) | ||
London office previously of 180, Fleet-streeet, EC4 moved to Bush House, Aldwych, W.C.2. (1925).<ref>The Engineer 1925/05/15</ref> | |||
Ditto Address: Telephone: Failsworth 2000. Telegraphic Address: "Ferranti, Hollinwood". (1937) | Ditto Address: Telephone: Failsworth 2000. Telegraphic Address: "Ferranti, Hollinwood". (1937) | ||
== Major Areas of the Business == | |||
'''Ferranti and Co''' was a major UK electrical engineering and equipment firm, latterly known primarily for defence electronics and power grid systems. Also famous in the computer industry for building the second commercial computer, the ''Ferranti Mark I'', the beginnings of a business which lasted until the 1970s. | |||
* | * [[Ferranti: Computers|Computers]] | ||
* [[Ferranti: Defence|Defence]] | |||
* [[Ferranti: Domestic Appliances|Domestic Appliances]] | |||
* [[Ferranti: Electricity Meters|Electricity Meters]] | |||
* [[Ferranti: Electronics|Electronics]] | |||
* [[Ferranti Engineering|Engineering]] | |||
* [[Ferranti Industrial Electronics|Industrial Electronics]] | |||
* [[Ferranti Instruments|Instruments]] | |||
* [[Ferranti: Non-Magnetic Iron|Non-Magnetic Iron]] | |||
* [[Ferranti: Power Generation and Transmission|Power Generation and Transmission]] | |||
* [[Ferranti: Radio|Radio]] | |||
* [[Ferranti: Television|Television]] | |||
* [[Ferranti: Transformers|Transformers]] | |||
== Predecessor Businesses == | |||
1882 [[Sebastian Ziani de Ferranti]] set up in business in London, designing various electrical devices and making his coreless dynamo and mercury meter. His early choice of the A.C. rather than the D.C. system made him one of the few experts in this system in the UK. With [[Alfred Thompson (2)|Alfred Thompson]] and [[Francis Ince]], he formed [[Ferranti, Thompson and Ince]] to manufacture alternators under licence from [[William Thomson|Sir William Thomson]]. | |||
Applied for Provisional Order empowering the company to supply electricity within the parish of St. John, Hampstead, in the county of Middlesex<ref>London Gazette</ref> | |||
1883 '''Ferranti, Thompson and Ince''' was wound up at the end of the year and its affairs amalgamated with the [[Hammond Electric Light and Power Supply Co]]<ref>The London Gazette 4 January 1884</ref>. Sebastian bought back his own patents and set up a company called '''S. Z. de Ferranti''' in partnership with [[Charles Pratt Sparks|C. P. Sparks]] and others. | |||
c.1885 Sebastian Ferranti was brought in by the promoters to overhaul the [[Grosvenor Gallery Electric Supply Corporation|Grosvenor Galley Electrical Lighting Co]] installation. Ferranti created a partnership with [[Francis Ince]] based at Hatton Garden, London. | |||
Ferranti was apparently the first to suggest that power stations should be outside the city, at a point convenient for fuel and water supply and that the power should be transmitted into the city by high-voltage alternating currents.<ref>The Engineer 1924/08/08</ref> | |||
1887 [[London Electric Supply Corporation]] took over the [[Grosvenor Gallery Electric Supply Corporation]]<ref>Wikipedia [http://en.wikipedia.org/wiki/List_of_pre-nationalisation_UK_electric_power_companies#Companies_merged_into_London_Electricity_Board_.28LEB.29]</ref> | |||
== S. Z. de Ferranti Ltd == | |||
1887 The [[London Electric Supply Corporation]] (LESCo) employed [[Sebastian Ziani de Ferranti]] to design their power station at [[Deptford Generating Station|Deptford]]. He designed the building, the generating plant and the distribution system. | |||
1889 '''S. Z. de Ferranti''' became a limited liability company (S. Z. de Ferranti Limited) | |||
1891 On completion, Deptford was the first truly modern power station, supplying high-voltage A.C. power that was then "stepped down" for consumer use on each street. This basic system remains in use today around the world<ref>Details and illustrations are in The Engineer of 5th April 1889</ref>. Sebastian Ferranti's contract at Deptford was not renewed and he left LESCo. Unfortunately for him there were no other British customers for his type of equipment so his company struggled for several years. | |||
Ferranti sold his patents for high-voltage cables to the [[British Insulated Wire Co]], providing useful collateral against the bank loans on which the firm relied. | |||
1894 [[Portsmouth Electric Supply Works]]. Illustration and article of the '''Ferranti''' equipment (supplied by Messrs S. Z. De Ferranti of London) <ref>[[The Engineer 1894/08/03]] p104, p107, p109 and p122-3</ref> | |||
Success followed and '''Ferranti''' started producing electrical equipment for sale. Soon the company was looking for considerably more room. Prices in the London area were too high, so the company moved to Hollinwood, near Oldham, Lancashire. | |||
1895 'A NEW INDUSTRY.— The large building known as the boiler works, situated near the railway at the higher end of Failsworth, has been bought by the firm of Messrs. S. L. De Ferranti and Co., electrical engineers, Charterhouse-square, London, for carrying on their business. It is expected they will employ 500 or 600 hands when fully at work. This should be good news for Hollinwood.'<ref>Cotton Factory Times, 6 December 1895</ref> | |||
1897 Production began at Hollinwood. Two major businesses were initially set up, one for production of meters, and the other for steam alternators. | |||
The Hollinwood works was originally occupied by the Stephenson boiler works. After a few years the company rented a former mill (Windsor Mill), where switches and transformers were produced. | |||
==Ferranti Steam Engines== | |||
Ferranti produced a number of large steam engines. They ran at relatively high speeds, in order to mimimise size for a given power output and to facilitate governing. 60 engines were built between 1896 and 1901. <ref>'Power from Steam. A History of the Stationary Steam Engine' by Richard L. Hills, Cambridge University Press, 1989/1993</ref>. Several competitors, principally [[Willans and Robinson]] and [[Belliss and Morcom]], produced engines operating at higher speeds, driving generators of smaller diameter than Ferranti's. For more information, see [[Ferranti: Power Generation and Transmission|Power Generation and Transmission]]. | |||
Engine No. 581 was constructed by Ferranti in Hollinwood in 1898 to drive a 250 kW shaft alternator at Lambeth. The engine is preserved in operational condition at [[Manchester's Museum of Science and Industry]] (see photo). In 1900 it was purchased by [[J. H. Gillett and Son]] and moved to their Chorley cotton mill and drove the mill by ropes from a grooved flywheel. In 1960 Ferranti acquired it for display at the Hollinwood works, with the rope drive retained. On closure of the works, the engine was acquired by the then Greater Manchester Museum of Science and Industry. A suitable Siemens zig-zag alternator was obtained from Ferranti and, fortunately, fitted the engine, allowing it to be displayed as a generating engine with flywheel alternator. <ref>[https://commons.wikimedia.org/wiki/File:Ferranti_engine,_Museum_of_Science_and_Industry_-_geograph.org.uk_-_1537297.jpg] Wikipedia</ref>. Some sources identify the mill as Brunswick Mill, while another<ref>Stationary Steam Engines of Great Britain, Vol 3.1: Lancashire, by George Watkins, Landmark Publishing, 2001. Photo: Plat No. 93</ref> names it as the Crosse Hall Mills. For more information, see [[Richard L. Hills|Richard L. Hills']] account [https://library.chethams.com/wp-content/uploads/sites/3/2016/09/north_western_museum_of_science_and_industry.pdf here]. | |||
==Ferranti Ltd== | |||
1901 '''Ferranti''' Ltd was registered and acquired the whole of the undertakings and assets of S. Z. de Ferranti Ltd. The prospectus identified the following Directors: S, Z. de Ferranti of Ingleside, Lyndhurst Road, Hampstead, London; A. B. Anderson, 75, Promenade, Southport; Charles Day, New Moston, Lancs; G. Del Rivo, Boscombe, Liverpool Road, Birkdale; Arthur E. Hadley, Eccles.<ref> Yorkshire Post and Leeds Intelligencer - Monday 22 July 1901 </ref> | |||
1901 Contract from London County Council to supply two 2500 HP engines. They would drive [[Dick, Kerr and Co]] generators. Several hundred tenders were received.<ref> Shields Daily News - Thursday 21 November 1901 </ref> | |||
1901 Contract from the Corporation of Cape Town to supply 1200 HP engines to drive [[Dick, Kerr and Co]] generators.<ref>Portsmouth Evening News - Friday 27 December 1901</ref> | |||
1903 '''Ferranti''' Ltd was in financial difficulties (largely because of its activities in steam engines and dynamos). At the instigation of the debenture stockholders, the company went into voluntary receivership. | |||
1905 A Scheme of Reconstruction was established. '''Ferranti''' Ltd was re-launched but focussed on the manufacture of Switch Gear, Transformers and Instruments. The company registered on 27 February, in reconstruction of a company of similar title, to acquire a business of electrical, mechanical and general engineers<ref>The Stock Exchange Year Book 1908</ref>. [[Sebastian Ziani de Ferranti]] took a less active role in the running of this company. Andrew Tait was elected Chairman (to 1927, Vice-Chairman 1927-1953). | |||
Over his career, [[Sebastian Ziani de Ferranti]] amassed 176 patents for such a diverse range of technologies including alternators, high-tension cables, circuit breakers, transformers and turbines. | |||
1910 Through the early part of the century, power was supplied by small companies, typically as an offshoot of plant set up to provide power to local industry. Each plant supplied a different standard, which made the mass production of electrical equipment for home users rather difficult. '''Ferranti''' started an effort to standardize the power supply, which eventually culminated in the National Grid in 1926. | |||
1911 Electrical Exhibition. Ferranti (of Hollinwood) exhibited high-tension enclosed electrical control panels.<ref>[[The Engineer 1911/10/06]] p363</ref> | |||
1912 [[Ferranti: Domestic Appliances|Domestic Appliance Department]] established | |||
1913 Ferranti Electric Company of Canada Limited founded | |||
1913 [[Samuel Ferguson]] and [[George Pailin]], who had worked for '''Ferranti''' as switchgear engineers, left to set up their own switchgear business, [[Ferguson Pailin|Ferguson Pailin and Co]] at a factory in Openshaw, Manchester. '''Ferranti''' sold them its switchgear patents and stock. | |||
1914 Listed as electrical and general engineers. Speciality: meters and switchgear. Employees 1,800 to 1,900. <ref>[[1914 Whitakers Red Book]]</ref> | |||
WW1 '''Ferranti''' manufactured shells. Sebastian Ferranti was principally responsible for securing the munitions contracts, developing the necessary mass production techniques, and utilizing the improved flow of profits to diversify the product range. Manufacture of domestic appliances and switchgear ceased. | |||
1916 The first Canadian factory opened. | |||
At some point Sebastian Ferranti was appointed technical director. | |||
Post-WWI After Ferranti's successful development of a technology-led strategy during the war, coupled with professional accountants overseeing the finances, the firm was able to flourish. Ferranti Ltd diversified into radio and domestic electrical appliances and rebuilt the transformer business which had languished since 1903. | |||
1921 Separate [[Ferranti: Transformers|Transformer Division]] set up | |||
1923 First electronics product introduced with start of production of audio frequency transformers | |||
1924 Started production of radio components and moving coil loudspeakers | |||
* | 1926 Ferranti Electric Inc., New York, founded | ||
1926 Start of production of electric fires | |||
1927 Domestic Appliance Department reorganised | |||
1928 Sebastian Ferranti became chairman of the company | |||
1929 Started production of [[Ferranti: Radio|Commercial Radio Receiver]] and valve production started | |||
1929 British Industries Fair Advert for Components - The Supreme Transformer; Radio Meters; Loud Speakers; Trickle-chargers; H. T. Supply Units. Manufacturers of Audio Frequency Transformers, Output Transformers, Push-Pull Transformers, Chokes, Fixed Condensers, Radio Meters, anode Feed Resistances, Model Railway Transformers, etc. Radiant Heat Electric Fire. (Wireless Section - Stand No. MM.48) <ref>[[1929 British Industries Fair]] Advert 234 and p60</ref> | |||
1930 Public issue of shares. Manufacturer of domestic electric service meters, instruments, transformers, fires, water heaters and wireless apparatus. [[Vincent Gerard S. Z. De Ferranti|Vincent Ziani De Ferranti]] was chairman.<ref>The Times July 1 1930</ref> | |||
1930 [[Ferranti: Electronics|Electronics Department]] set up to manufacture electronic components, which at that time were being manufactured by the [[Ferranti Instruments|Instrument Department]]. | |||
1935 Radio factory at Moston, Manchester opened. | |||
1935 See [[Ferranti:1935 Review]] | |||
1936 Started production of cathode ray tubes and television receivers. | |||
1937 Domestic Appliance Department moved to Moston; TV production began. | |||
[[Ferranti Instruments]], also based at Moston, developed various items for scientific measurements, including one of the first cone-and-plate viscometers. | |||
1937 Electrical and general engineers. <ref>[[1937 The Aeroplane Directory of the Aviation and Allied Industries]]</ref> | |||
1937 British Industries Fair Advert for: Transformers; Testing Instruments; Meters; Domestic Appliances; Quality Castings. Ferranti Service from the Grid to the Family Hearth. Power Transformers, Regulating Equipment, Protective Gear, Instruments, Relays, Meters, Fires, Water Heaters, Clocks, Radio Receivers. Also Quality Castings. (Electricity: Industrial and Domestic Section - Stand Nos. Cb.713 and Cb.612) <ref>[[1937 British Industries Fair]] Advert p573</ref> | |||
1939 See [[1939 Suppliers to the Aircraft Industry| Aircraft Industry Suppliers]] | |||
WWII During the war, '''Ferranti''' became a major supplier of electronics, and was heavily involved in the early development of radar in the United Kingdom. In the post-war era this became a large segment of their company, with various branches supplying radar sets, avionics and other military electronics, both in the UK and their various international offices. Valve production was expanded to supply other companies as well as Ferranti. | |||
1943 The Edinburgh factory was opened to manufacture Gyro Gun Sights signalling the beginning of the Scottish Group and '''Ferranti's''' move into the Defence market | |||
Other factories were at Oldham, Wythenshawe, Cheadle Heath and Gorton. Eventually branch-plants were set up in Edinburgh, Dalkeith, Aberdeen, Bracknell and Cwmbran as well as Germany and the U.S.A. and several British Commonwealth countries including Canada, Australia and Singapore. | |||
1946 Began to supply valves to other makers of sets<ref>[http://www.competition-commission.org.uk/rep_pub/reports/1950_1959/fulltext/020c02.pdf] Competition Commission</ref>. | |||
1948 General supplier of tubes<ref>[http://www.competition-commission.org.uk/rep_pub/reports/1950_1959/fulltext/020c02.pdf] Competition Commission</ref>. | |||
1949 The [[Ferranti: Computers|Computer Group]] was formed. '''Ferranti''' joined with various university-based research groups to develop computers. Their first effort was the ''Ferranti Mark I'', with about nine delivered between 1951–1957. | |||
1953 Manufacturer of TV sets <ref>[[Choosing your Television Set]]</ref> | |||
1954 Guided Weapon research began at Wythenshawe | |||
1954 'TOWARDS AUTOMATIC FACTORIES. Glimpses of Research in Progress. ....Ferranti engineers have designed an "industrial computer" which can make its own calculations and carry out a predetermined programme of work. It is demonstrated in control of a milling machine set to cut a circular piece of metal. The system comprises:— 1. A tape perforator by which the planning engineer instructs the computer to perform the required operation. This involves coding the dimensions of the article together with machining instructions as perforations on a strip of paper tape. 2. A tape reader which transfers the instructions coded on the tape to the computer. 3. The computer itself, which takes this basic information and calculates precisely the movements which the table of the machine tool will have to make to cut the required shape. 4. A magnetic tape recorder which records the instructions for these movements. 5. The machine tool itself complete with tape-controlled mechanisms and measuring devices which move under the control of the tape playback unit. <br>The accuracy of the whole control system is within two ten-thousandths of an inch. This is a much higher accuracy than the basic milling machine is capable of turning out because of such factors as tool deflection and bearing vibration. In order to utilise the control system fully special machines will have to be made which can cut to a much higher degree of accuracy than hitherto achieved. The system at present can cut as accurately as a man can do on the same machine but at a vastly higher speed.'<ref>The Scotsman - Tuesday 12 October 1954</ref>. Note: The article was accompanied by the same illustration as that shown in the 1956 image opposite. | |||
1955 '''Ferranti''' had been involved in production of electronic devices including Cathode Ray Tube devices and germanium semiconductors for some time before it became the first European company to produce a silicon diode. | |||
1955 'College Talk on. AUTOMATION. The Second Industrial Revolution. The first of a series of six lectures on Modern Developments in Science was given by Dr. H. D. Turner, Staff Lecturer in Science in the Department of Extramural Studies of the University of Sheffield, on Friday, in Gainsborough County Technical College. After a brief historical survey, the lecturer dealt in some detail with the basic principles of Automation, which he considered to be the second Industrial Revolution. Dr. Turner explained the principles of transfer machines, autofab, the electronic copying lathe, the electronic copying milling-machine, and the wonders of the Ferranti computer controlled milling-machine. .... <br>PERFECT COPY <br>Dr. Turner explained the underlying principles of the electronic copying lathe and the electronic copying milling machine. He described how the component in question was copied faithfully by the lathe or milling-machine by means of a probe, a magnetic tape recorder and the electronic control gear. Finally the lecturer dealt with the Ferranti computer controlled milling-machine. In this case it was not necessary to have the component in question, for a system of mathematical ordinates or instructions could be supplied to the computer which handed the information to the magnetic tape recorder, this being connected through the electronic control gear to the milling-machine. The milling machine accurately performed the various operations. The tape recorder could control several milling-machines at the same time. Dr. Turner described how the optical properties of the diffraction grating and a photo-electric cell enabled an accurate check the work to be made throughout the milling.<ref>Retford, Worksop, Isle of Axholme and Gainsborough News - Friday 28 October 1955</ref> | |||
1956 The ''Pegasus'' computer was introduced and became '''Ferranti's''' most popular valve (vacuum tube) system, with 38 units sold. | |||
1957 '''Ferranti''''s Radio and T. V. interests were sold to [[E. K. Cole]] Ltd | |||
1957 The [[Ferranti: Transformers|Distribution Transformers Department]] was set up | |||
In collaboration with the University of Manchester '''Ferranti''' built a new version of the famous ''Manchester Mark I'' computer, replacing about half of the valve diodes with solid state diodes, which allowed the speed to be increased dramatically as well as increasing reliability. '''Ferranti''' offered the result commercially as the '''Mercury''', and eventually sold 19 in total. Although a small part of '''Ferranti''''s empire, the computer division was nevertheless highly visible. | |||
1958 Closure of the Domestic Appliance Department | |||
1958-62 Work on a completely new design of computer, the '''Atlas''', started soon after the delivery of the Mercury, aiming to dramatically improve performance. The machine first ran in 1962, and '''Ferranti''' eventually built 3 machines in total. | |||
1961 Electrical and general engineers, manufacturing heavy electrical equipment, including power transformers for the National Grid, electricity service meters and instruments, radar and electrical domestic appliances, water heaters and valves, and electronic equipment. <ref>[[1961 Dun and Bradstreet KBE]]</ref> | |||
1961 Acquired the electricity meter business of [[Aron Electricity Meter Co]] | |||
1963 [[Sebastian Basil Joseph Ziani De Ferranti|Sebastian Ziani De Ferranti]] took over as chairman on the retirement of Sir Vincent<ref>The Times July 11, 1963</ref>. At some point his brother, Basil, became deputy chairman. | |||
1963 The Computer Department was sold to [[International Computers and Tabulators]] Limited (ICT). By this time, '''Ferranti's''' mid-size machines were no longer competitive but efforts to design a replacement had bogged down. Into this void stepped the Canadian division, '''Ferranti-Packard''', who had used several of the ideas under development in England to produce very quickly the Ferranti-Packard 6000. After studying several options, ICT selected the FP 6000 as the basis for their ICT 1900 line which sold into the 1970s. | |||
The deal with ICT excluded '''Ferranti''' from the commercial sector of computing but left the industrial field free. Some of the technology of the FP 6000 was later used in '''Ferranti's''' Argus range of computers. The first computer was the Argus 200 which was developed at the Wythenshawe factory. The Argus 100 and 300 followed, aimed at process control applications. | |||
1967 Closure of the Distribution Transformers Department. | |||
1968 The Argus 500 was the first in the range to use integrated circuits and had considerably more computing power than the earlier machines. | |||
1968 Details of a new impulse generator built by '''Ferranti''' of Hollinwood. <ref>[[The Engineer]] of 9th February 1968 p233</ref> | |||
1970s Early in the decade '''Ferranti''' designed the Argus 700; this also achieved international success for industrial and military applications. | |||
Meanwhile in Bracknell, [[Ferranti:Computers|Digital Systems division]] was developing a range of mainframe computers for naval applications. Early computers using discrete transistors were the ''Hermes'' and ''Poseidon'' and these were followed by the F1600 in the mid 1960s. Some of these machines remained in active service on naval vessels for many years. | |||
1972 Ferranti received support for a project on a measuring machine from government programme for the machine tool industry <ref>The Times, Mar 15, 1972</ref> | |||
1974 The company was still largely owned by the family - about 56 percent of the ordinary shares where held by the 2 Ferranti brothers and their trusts; the remaining 44 percent was widely held. The Ferranti brothers had a good reputation for innovation in high technology<ref>The Times Sept. 18, 1974</ref> | |||
1974 The Transformer Division ran into financial difficulties, reflecting the lack of focus in the company strategy for the whole company and the inability of the family to grasp the problem of the ownership of the business<ref>The Times May 15, 1975</ref>. As a result, the Government, through the National Enterprise Board, injected £15 Million into '''Ferranti''' in return for a 50% stake in the voting capital of the company (62.5 percent of the equity) leading to a reduction in the Ferranti family shareholding to a minority of the total. A new Managing Director and new Chief Executive were appointed. | |||
1974 Introduced an improved machine to measure more accurately surface profiles.<ref>The Engineer 1974/04/11</ref> | |||
1975 The Transformer Division was closed. | |||
1976 [[Ferranti Engineering]] Limited was set up | |||
[[Ferranti Semiconductor]] Ltd. produced a range of silicon bipolar devices including, in 1977, the F100-L, an early 8-bit single chip microprocessor with 16-bit addressing. An F100-L was carried into space on the amateur radio satellite UoSAT-1 (Oscar 9). '''Ferranti''''s ZTX series bipolar transistors gave their name to the inheritor of Ferranti Semiconductor's discrete semiconductor business, '''Zetex''' plc. | |||
1978 Shares in Ferranti were reintroduced to trading on the London stock exchange | |||
1982 The National Enterprise Board sold its '''Ferranti''' shares on the London stock exchange | |||
1984 The company continued to provide sharply growing profits, in contrast to its large competitors in the electronics sector<ref>The Times Dec. 7, 1984</ref> | |||
1984 The Company was restructured into 5 operating divisions: | |||
* [[Ferranti Industrial Electronics|Industrial Electronics]] | |||
* [[Ferranti: Computers|Computer Systems]] | |||
* [[Ferranti: Defence|Defence Systems]] | |||
* [[Ferranti: Electronics|Electronics]] | |||
* [[Ferranti: Instrumentation|Instrumentation]] | |||
In the mid-eighties, '''Ferranti''' produced some of the first large '''Uncommitted Logic Arrays''' (ULAs) which were used in home computers such as the Acorn Electron and BBC Microcomputer. The microelectronics business was sold to [[Plessey Co]] in 1988. | |||
From the late 1980s, '''Ferranti''' concentrated on defence sales. Radar systems developed for the [[Bristol Bloodhound|Bloodhound]] Surface-to-Air Missile was a key money earner. | |||
1987 '''Ferranti''' purchased '''International Signal and Control''' (ISC), a Pennsylvania-based defence contractor, and was renamed '''Ferranti International plc'''. Unknown to '''Ferranti''', ISC's business primarily consisted of illegal arms sales started at the behest of various US clandestine organizations. On paper the company looked to be extremely profitable on sales of high-priced "above board" items, but in fact these profits were essentially non-existent. With the sale to '''Ferranti''' all illegal sales ended immediately, leaving the ISC company with no obvious cash flow. | |||
Ferranti began a programme of asset disposals to raise funds. | |||
1988 [[Plessey Co|Plessey]] acquired Ferranti's semiconductor operations<ref>The Times Mar. 2, 1988</ref> | |||
1989 The Serious Fraud Office started criminal investigation regarding alleged massive fraud at ISC. | |||
1990 [[GEC]] acquired the defence radar parts of '''Ferranti'''. This would provide more stability for the unit, mainly located in Edinburgh, which was bidding for to win the contract for the Eurofighter. The sale reduced Ferranti's dependence on defence work to about half of its total sales; other major parts of the business were sales of Zonephone and computer software<ref>The Times Jan. 24, 1990</ref>. The Computer division sold half of the sonar business to [[Thomson-CSF]], with an option for Thomson to acquire the rest<ref>The Times Feb. 9, 1990</ref> | |||
1990 Two parts of Industrial Electronics division, laser and components, both based in Dundee, were in negotiation to conduct management buy-outs<ref>The Times Jan. 31, 1990</ref> | |||
1991 In December, James Guerin, founder of ISC and co-Chairman of the merged company, pleaded guilty before the federal court in Philadelphia, to fraud committed both in the USA and UK. All offences which would have formed part of any UK prosecution were encompassed by the US trial and, as such, no UK trial proceeded. | |||
1993 The massive financial and legal difficulties forced '''Ferranti''' into bankruptcy in December. As well as the defence systems business, the civil systems business, based at Wythenshawe, which provided simulation systems to civil aviation, airport information systems, was developing a high tech baggage handling system; the business also provided services for electricity and gas utilities and control systems for nuclear power station and systems for oil platforms; losses on some contracts agreed by this division had contributed to putting the company into receivership<ref>The Times, Dec. 6, 1993</ref> | |||
1994 '''Ferranti''' was placed in receivership in January. | |||
1994 The computer section was bought out of bankruptcy by a [[Thomson-CSF]] subsidiary called '''SYSECA'''. It traded on as Ferranti-SYSECA, until the Ferranti name was finally dropped about 1996. | |||
Ferranti's links with Oldham continue with the presence of Ferranti Technologies,who produce equipment for the aerospace and defence industries. See [http://www.ferranti-technologies.co.uk/ Ferranti Technologies website] | |||
See [https://en.wikipedia.org/wiki/Ferranti Wikipedia entry] for information on the fate of other branches. | |||
== See Also == | == See Also == | ||
Line 101: | Line 322: | ||
* [http://en.wikipedia.org/wiki/Ferranti] Wikipedia | * [http://en.wikipedia.org/wiki/Ferranti] Wikipedia | ||
* [[The Engineer]] of 5th April 1889 p286-7, p293, p311, p315, p324 and others | * [[The Engineer]] of 5th April 1889 p286-7, p293, p311, p315, p324 and others | ||
* The Ferranti Collection - abstract at National Archives of papers in the Manchester Museum of Science and Industry [http://www.nationalarchives.gov.uk/a2a/records.aspx?cat=422-199610_4&cid=-1#-1] | |||
* Biography of Sebastian Z de Ferranti, ODNB | |||
[[Category: | {{DEFAULTSORT: }} | ||
[[Category: Town - Manchester]] | |||
[[Category: Town - Oldham]] | |||
[[Category: Computers (both hardware and software)]] | |||
[[Category: Electrical Engineering - Heavy]] | |||
[[Category: Electrical Engineering - Light]] | |||
[[Category: Electronic Equipment]] | |||
[[Category: Radio and Television]] | [[Category: Radio and Television]] | ||
[[Category: Electronic Components]] | |||
[[Category: Telecommunications]] | |||
[[Category: Audio Equipment]] | |||
[[Category: Gas, Water and Electricity Meters]] | |||
[[Category: Iron Founders]] |
Latest revision as of 23:33, 3 February 2024
of Hollinwood, Lancashire. Telephone: Failsworth 161; City 7618 and Central 9325. Cables: "Ferranti, Hollinwood"; "Ferranti, Estrand, London". (1929)
London office previously of 180, Fleet-streeet, EC4 moved to Bush House, Aldwych, W.C.2. (1925).[1]
Ditto Address: Telephone: Failsworth 2000. Telegraphic Address: "Ferranti, Hollinwood". (1937)
Major Areas of the Business
Ferranti and Co was a major UK electrical engineering and equipment firm, latterly known primarily for defence electronics and power grid systems. Also famous in the computer industry for building the second commercial computer, the Ferranti Mark I, the beginnings of a business which lasted until the 1970s.
- Computers
- Defence
- Domestic Appliances
- Electricity Meters
- Electronics
- Engineering
- Industrial Electronics
- Instruments
- Non-Magnetic Iron
- Power Generation and Transmission
- Radio
- Television
- Transformers
Predecessor Businesses
1882 Sebastian Ziani de Ferranti set up in business in London, designing various electrical devices and making his coreless dynamo and mercury meter. His early choice of the A.C. rather than the D.C. system made him one of the few experts in this system in the UK. With Alfred Thompson and Francis Ince, he formed Ferranti, Thompson and Ince to manufacture alternators under licence from Sir William Thomson.
Applied for Provisional Order empowering the company to supply electricity within the parish of St. John, Hampstead, in the county of Middlesex[2]
1883 Ferranti, Thompson and Ince was wound up at the end of the year and its affairs amalgamated with the Hammond Electric Light and Power Supply Co[3]. Sebastian bought back his own patents and set up a company called S. Z. de Ferranti in partnership with C. P. Sparks and others.
c.1885 Sebastian Ferranti was brought in by the promoters to overhaul the Grosvenor Galley Electrical Lighting Co installation. Ferranti created a partnership with Francis Ince based at Hatton Garden, London.
Ferranti was apparently the first to suggest that power stations should be outside the city, at a point convenient for fuel and water supply and that the power should be transmitted into the city by high-voltage alternating currents.[4]
1887 London Electric Supply Corporation took over the Grosvenor Gallery Electric Supply Corporation[5]
S. Z. de Ferranti Ltd
1887 The London Electric Supply Corporation (LESCo) employed Sebastian Ziani de Ferranti to design their power station at Deptford. He designed the building, the generating plant and the distribution system.
1889 S. Z. de Ferranti became a limited liability company (S. Z. de Ferranti Limited)
1891 On completion, Deptford was the first truly modern power station, supplying high-voltage A.C. power that was then "stepped down" for consumer use on each street. This basic system remains in use today around the world[6]. Sebastian Ferranti's contract at Deptford was not renewed and he left LESCo. Unfortunately for him there were no other British customers for his type of equipment so his company struggled for several years.
Ferranti sold his patents for high-voltage cables to the British Insulated Wire Co, providing useful collateral against the bank loans on which the firm relied.
1894 Portsmouth Electric Supply Works. Illustration and article of the Ferranti equipment (supplied by Messrs S. Z. De Ferranti of London) [7]
Success followed and Ferranti started producing electrical equipment for sale. Soon the company was looking for considerably more room. Prices in the London area were too high, so the company moved to Hollinwood, near Oldham, Lancashire.
1895 'A NEW INDUSTRY.— The large building known as the boiler works, situated near the railway at the higher end of Failsworth, has been bought by the firm of Messrs. S. L. De Ferranti and Co., electrical engineers, Charterhouse-square, London, for carrying on their business. It is expected they will employ 500 or 600 hands when fully at work. This should be good news for Hollinwood.'[8]
1897 Production began at Hollinwood. Two major businesses were initially set up, one for production of meters, and the other for steam alternators.
The Hollinwood works was originally occupied by the Stephenson boiler works. After a few years the company rented a former mill (Windsor Mill), where switches and transformers were produced.
Ferranti Steam Engines
Ferranti produced a number of large steam engines. They ran at relatively high speeds, in order to mimimise size for a given power output and to facilitate governing. 60 engines were built between 1896 and 1901. [9]. Several competitors, principally Willans and Robinson and Belliss and Morcom, produced engines operating at higher speeds, driving generators of smaller diameter than Ferranti's. For more information, see Power Generation and Transmission.
Engine No. 581 was constructed by Ferranti in Hollinwood in 1898 to drive a 250 kW shaft alternator at Lambeth. The engine is preserved in operational condition at Manchester's Museum of Science and Industry (see photo). In 1900 it was purchased by J. H. Gillett and Son and moved to their Chorley cotton mill and drove the mill by ropes from a grooved flywheel. In 1960 Ferranti acquired it for display at the Hollinwood works, with the rope drive retained. On closure of the works, the engine was acquired by the then Greater Manchester Museum of Science and Industry. A suitable Siemens zig-zag alternator was obtained from Ferranti and, fortunately, fitted the engine, allowing it to be displayed as a generating engine with flywheel alternator. [10]. Some sources identify the mill as Brunswick Mill, while another[11] names it as the Crosse Hall Mills. For more information, see Richard L. Hills' account here.
Ferranti Ltd
1901 Ferranti Ltd was registered and acquired the whole of the undertakings and assets of S. Z. de Ferranti Ltd. The prospectus identified the following Directors: S, Z. de Ferranti of Ingleside, Lyndhurst Road, Hampstead, London; A. B. Anderson, 75, Promenade, Southport; Charles Day, New Moston, Lancs; G. Del Rivo, Boscombe, Liverpool Road, Birkdale; Arthur E. Hadley, Eccles.[12]
1901 Contract from London County Council to supply two 2500 HP engines. They would drive Dick, Kerr and Co generators. Several hundred tenders were received.[13]
1901 Contract from the Corporation of Cape Town to supply 1200 HP engines to drive Dick, Kerr and Co generators.[14]
1903 Ferranti Ltd was in financial difficulties (largely because of its activities in steam engines and dynamos). At the instigation of the debenture stockholders, the company went into voluntary receivership.
1905 A Scheme of Reconstruction was established. Ferranti Ltd was re-launched but focussed on the manufacture of Switch Gear, Transformers and Instruments. The company registered on 27 February, in reconstruction of a company of similar title, to acquire a business of electrical, mechanical and general engineers[15]. Sebastian Ziani de Ferranti took a less active role in the running of this company. Andrew Tait was elected Chairman (to 1927, Vice-Chairman 1927-1953).
Over his career, Sebastian Ziani de Ferranti amassed 176 patents for such a diverse range of technologies including alternators, high-tension cables, circuit breakers, transformers and turbines.
1910 Through the early part of the century, power was supplied by small companies, typically as an offshoot of plant set up to provide power to local industry. Each plant supplied a different standard, which made the mass production of electrical equipment for home users rather difficult. Ferranti started an effort to standardize the power supply, which eventually culminated in the National Grid in 1926.
1911 Electrical Exhibition. Ferranti (of Hollinwood) exhibited high-tension enclosed electrical control panels.[16]
1912 Domestic Appliance Department established
1913 Ferranti Electric Company of Canada Limited founded
1913 Samuel Ferguson and George Pailin, who had worked for Ferranti as switchgear engineers, left to set up their own switchgear business, Ferguson Pailin and Co at a factory in Openshaw, Manchester. Ferranti sold them its switchgear patents and stock.
1914 Listed as electrical and general engineers. Speciality: meters and switchgear. Employees 1,800 to 1,900. [17]
WW1 Ferranti manufactured shells. Sebastian Ferranti was principally responsible for securing the munitions contracts, developing the necessary mass production techniques, and utilizing the improved flow of profits to diversify the product range. Manufacture of domestic appliances and switchgear ceased.
1916 The first Canadian factory opened.
At some point Sebastian Ferranti was appointed technical director.
Post-WWI After Ferranti's successful development of a technology-led strategy during the war, coupled with professional accountants overseeing the finances, the firm was able to flourish. Ferranti Ltd diversified into radio and domestic electrical appliances and rebuilt the transformer business which had languished since 1903.
1921 Separate Transformer Division set up
1923 First electronics product introduced with start of production of audio frequency transformers
1924 Started production of radio components and moving coil loudspeakers
1926 Ferranti Electric Inc., New York, founded
1926 Start of production of electric fires
1927 Domestic Appliance Department reorganised
1928 Sebastian Ferranti became chairman of the company
1929 Started production of Commercial Radio Receiver and valve production started
1929 British Industries Fair Advert for Components - The Supreme Transformer; Radio Meters; Loud Speakers; Trickle-chargers; H. T. Supply Units. Manufacturers of Audio Frequency Transformers, Output Transformers, Push-Pull Transformers, Chokes, Fixed Condensers, Radio Meters, anode Feed Resistances, Model Railway Transformers, etc. Radiant Heat Electric Fire. (Wireless Section - Stand No. MM.48) [18]
1930 Public issue of shares. Manufacturer of domestic electric service meters, instruments, transformers, fires, water heaters and wireless apparatus. Vincent Ziani De Ferranti was chairman.[19]
1930 Electronics Department set up to manufacture electronic components, which at that time were being manufactured by the Instrument Department.
1935 Radio factory at Moston, Manchester opened.
1935 See Ferranti:1935 Review
1936 Started production of cathode ray tubes and television receivers.
1937 Domestic Appliance Department moved to Moston; TV production began.
Ferranti Instruments, also based at Moston, developed various items for scientific measurements, including one of the first cone-and-plate viscometers.
1937 Electrical and general engineers. [20]
1937 British Industries Fair Advert for: Transformers; Testing Instruments; Meters; Domestic Appliances; Quality Castings. Ferranti Service from the Grid to the Family Hearth. Power Transformers, Regulating Equipment, Protective Gear, Instruments, Relays, Meters, Fires, Water Heaters, Clocks, Radio Receivers. Also Quality Castings. (Electricity: Industrial and Domestic Section - Stand Nos. Cb.713 and Cb.612) [21]
1939 See Aircraft Industry Suppliers
WWII During the war, Ferranti became a major supplier of electronics, and was heavily involved in the early development of radar in the United Kingdom. In the post-war era this became a large segment of their company, with various branches supplying radar sets, avionics and other military electronics, both in the UK and their various international offices. Valve production was expanded to supply other companies as well as Ferranti.
1943 The Edinburgh factory was opened to manufacture Gyro Gun Sights signalling the beginning of the Scottish Group and Ferranti's move into the Defence market
Other factories were at Oldham, Wythenshawe, Cheadle Heath and Gorton. Eventually branch-plants were set up in Edinburgh, Dalkeith, Aberdeen, Bracknell and Cwmbran as well as Germany and the U.S.A. and several British Commonwealth countries including Canada, Australia and Singapore.
1946 Began to supply valves to other makers of sets[22].
1948 General supplier of tubes[23].
1949 The Computer Group was formed. Ferranti joined with various university-based research groups to develop computers. Their first effort was the Ferranti Mark I, with about nine delivered between 1951–1957.
1953 Manufacturer of TV sets [24]
1954 Guided Weapon research began at Wythenshawe
1954 'TOWARDS AUTOMATIC FACTORIES. Glimpses of Research in Progress. ....Ferranti engineers have designed an "industrial computer" which can make its own calculations and carry out a predetermined programme of work. It is demonstrated in control of a milling machine set to cut a circular piece of metal. The system comprises:— 1. A tape perforator by which the planning engineer instructs the computer to perform the required operation. This involves coding the dimensions of the article together with machining instructions as perforations on a strip of paper tape. 2. A tape reader which transfers the instructions coded on the tape to the computer. 3. The computer itself, which takes this basic information and calculates precisely the movements which the table of the machine tool will have to make to cut the required shape. 4. A magnetic tape recorder which records the instructions for these movements. 5. The machine tool itself complete with tape-controlled mechanisms and measuring devices which move under the control of the tape playback unit.
The accuracy of the whole control system is within two ten-thousandths of an inch. This is a much higher accuracy than the basic milling machine is capable of turning out because of such factors as tool deflection and bearing vibration. In order to utilise the control system fully special machines will have to be made which can cut to a much higher degree of accuracy than hitherto achieved. The system at present can cut as accurately as a man can do on the same machine but at a vastly higher speed.'[25]. Note: The article was accompanied by the same illustration as that shown in the 1956 image opposite.
1955 Ferranti had been involved in production of electronic devices including Cathode Ray Tube devices and germanium semiconductors for some time before it became the first European company to produce a silicon diode.
1955 'College Talk on. AUTOMATION. The Second Industrial Revolution. The first of a series of six lectures on Modern Developments in Science was given by Dr. H. D. Turner, Staff Lecturer in Science in the Department of Extramural Studies of the University of Sheffield, on Friday, in Gainsborough County Technical College. After a brief historical survey, the lecturer dealt in some detail with the basic principles of Automation, which he considered to be the second Industrial Revolution. Dr. Turner explained the principles of transfer machines, autofab, the electronic copying lathe, the electronic copying milling-machine, and the wonders of the Ferranti computer controlled milling-machine. ....
PERFECT COPY
Dr. Turner explained the underlying principles of the electronic copying lathe and the electronic copying milling machine. He described how the component in question was copied faithfully by the lathe or milling-machine by means of a probe, a magnetic tape recorder and the electronic control gear. Finally the lecturer dealt with the Ferranti computer controlled milling-machine. In this case it was not necessary to have the component in question, for a system of mathematical ordinates or instructions could be supplied to the computer which handed the information to the magnetic tape recorder, this being connected through the electronic control gear to the milling-machine. The milling machine accurately performed the various operations. The tape recorder could control several milling-machines at the same time. Dr. Turner described how the optical properties of the diffraction grating and a photo-electric cell enabled an accurate check the work to be made throughout the milling.[26]
1956 The Pegasus computer was introduced and became Ferranti's most popular valve (vacuum tube) system, with 38 units sold.
1957 Ferranti's Radio and T. V. interests were sold to E. K. Cole Ltd
1957 The Distribution Transformers Department was set up
In collaboration with the University of Manchester Ferranti built a new version of the famous Manchester Mark I computer, replacing about half of the valve diodes with solid state diodes, which allowed the speed to be increased dramatically as well as increasing reliability. Ferranti offered the result commercially as the Mercury, and eventually sold 19 in total. Although a small part of Ferranti's empire, the computer division was nevertheless highly visible.
1958 Closure of the Domestic Appliance Department
1958-62 Work on a completely new design of computer, the Atlas, started soon after the delivery of the Mercury, aiming to dramatically improve performance. The machine first ran in 1962, and Ferranti eventually built 3 machines in total.
1961 Electrical and general engineers, manufacturing heavy electrical equipment, including power transformers for the National Grid, electricity service meters and instruments, radar and electrical domestic appliances, water heaters and valves, and electronic equipment. [27]
1961 Acquired the electricity meter business of Aron Electricity Meter Co
1963 Sebastian Ziani De Ferranti took over as chairman on the retirement of Sir Vincent[28]. At some point his brother, Basil, became deputy chairman.
1963 The Computer Department was sold to International Computers and Tabulators Limited (ICT). By this time, Ferranti's mid-size machines were no longer competitive but efforts to design a replacement had bogged down. Into this void stepped the Canadian division, Ferranti-Packard, who had used several of the ideas under development in England to produce very quickly the Ferranti-Packard 6000. After studying several options, ICT selected the FP 6000 as the basis for their ICT 1900 line which sold into the 1970s.
The deal with ICT excluded Ferranti from the commercial sector of computing but left the industrial field free. Some of the technology of the FP 6000 was later used in Ferranti's Argus range of computers. The first computer was the Argus 200 which was developed at the Wythenshawe factory. The Argus 100 and 300 followed, aimed at process control applications.
1967 Closure of the Distribution Transformers Department.
1968 The Argus 500 was the first in the range to use integrated circuits and had considerably more computing power than the earlier machines.
1968 Details of a new impulse generator built by Ferranti of Hollinwood. [29]
1970s Early in the decade Ferranti designed the Argus 700; this also achieved international success for industrial and military applications.
Meanwhile in Bracknell, Digital Systems division was developing a range of mainframe computers for naval applications. Early computers using discrete transistors were the Hermes and Poseidon and these were followed by the F1600 in the mid 1960s. Some of these machines remained in active service on naval vessels for many years.
1972 Ferranti received support for a project on a measuring machine from government programme for the machine tool industry [30]
1974 The company was still largely owned by the family - about 56 percent of the ordinary shares where held by the 2 Ferranti brothers and their trusts; the remaining 44 percent was widely held. The Ferranti brothers had a good reputation for innovation in high technology[31]
1974 The Transformer Division ran into financial difficulties, reflecting the lack of focus in the company strategy for the whole company and the inability of the family to grasp the problem of the ownership of the business[32]. As a result, the Government, through the National Enterprise Board, injected £15 Million into Ferranti in return for a 50% stake in the voting capital of the company (62.5 percent of the equity) leading to a reduction in the Ferranti family shareholding to a minority of the total. A new Managing Director and new Chief Executive were appointed.
1974 Introduced an improved machine to measure more accurately surface profiles.[33]
1975 The Transformer Division was closed.
1976 Ferranti Engineering Limited was set up
Ferranti Semiconductor Ltd. produced a range of silicon bipolar devices including, in 1977, the F100-L, an early 8-bit single chip microprocessor with 16-bit addressing. An F100-L was carried into space on the amateur radio satellite UoSAT-1 (Oscar 9). Ferranti's ZTX series bipolar transistors gave their name to the inheritor of Ferranti Semiconductor's discrete semiconductor business, Zetex plc.
1978 Shares in Ferranti were reintroduced to trading on the London stock exchange
1982 The National Enterprise Board sold its Ferranti shares on the London stock exchange
1984 The company continued to provide sharply growing profits, in contrast to its large competitors in the electronics sector[34]
1984 The Company was restructured into 5 operating divisions:
In the mid-eighties, Ferranti produced some of the first large Uncommitted Logic Arrays (ULAs) which were used in home computers such as the Acorn Electron and BBC Microcomputer. The microelectronics business was sold to Plessey Co in 1988.
From the late 1980s, Ferranti concentrated on defence sales. Radar systems developed for the Bloodhound Surface-to-Air Missile was a key money earner.
1987 Ferranti purchased International Signal and Control (ISC), a Pennsylvania-based defence contractor, and was renamed Ferranti International plc. Unknown to Ferranti, ISC's business primarily consisted of illegal arms sales started at the behest of various US clandestine organizations. On paper the company looked to be extremely profitable on sales of high-priced "above board" items, but in fact these profits were essentially non-existent. With the sale to Ferranti all illegal sales ended immediately, leaving the ISC company with no obvious cash flow.
Ferranti began a programme of asset disposals to raise funds.
1988 Plessey acquired Ferranti's semiconductor operations[35]
1989 The Serious Fraud Office started criminal investigation regarding alleged massive fraud at ISC.
1990 GEC acquired the defence radar parts of Ferranti. This would provide more stability for the unit, mainly located in Edinburgh, which was bidding for to win the contract for the Eurofighter. The sale reduced Ferranti's dependence on defence work to about half of its total sales; other major parts of the business were sales of Zonephone and computer software[36]. The Computer division sold half of the sonar business to Thomson-CSF, with an option for Thomson to acquire the rest[37]
1990 Two parts of Industrial Electronics division, laser and components, both based in Dundee, were in negotiation to conduct management buy-outs[38]
1991 In December, James Guerin, founder of ISC and co-Chairman of the merged company, pleaded guilty before the federal court in Philadelphia, to fraud committed both in the USA and UK. All offences which would have formed part of any UK prosecution were encompassed by the US trial and, as such, no UK trial proceeded.
1993 The massive financial and legal difficulties forced Ferranti into bankruptcy in December. As well as the defence systems business, the civil systems business, based at Wythenshawe, which provided simulation systems to civil aviation, airport information systems, was developing a high tech baggage handling system; the business also provided services for electricity and gas utilities and control systems for nuclear power station and systems for oil platforms; losses on some contracts agreed by this division had contributed to putting the company into receivership[39]
1994 Ferranti was placed in receivership in January.
1994 The computer section was bought out of bankruptcy by a Thomson-CSF subsidiary called SYSECA. It traded on as Ferranti-SYSECA, until the Ferranti name was finally dropped about 1996.
Ferranti's links with Oldham continue with the presence of Ferranti Technologies,who produce equipment for the aerospace and defence industries. See Ferranti Technologies website
See Wikipedia entry for information on the fate of other branches.
See Also
Sources of Information
- ↑ The Engineer 1925/05/15
- ↑ London Gazette
- ↑ The London Gazette 4 January 1884
- ↑ The Engineer 1924/08/08
- ↑ Wikipedia [1]
- ↑ Details and illustrations are in The Engineer of 5th April 1889
- ↑ The Engineer 1894/08/03 p104, p107, p109 and p122-3
- ↑ Cotton Factory Times, 6 December 1895
- ↑ 'Power from Steam. A History of the Stationary Steam Engine' by Richard L. Hills, Cambridge University Press, 1989/1993
- ↑ [2] Wikipedia
- ↑ Stationary Steam Engines of Great Britain, Vol 3.1: Lancashire, by George Watkins, Landmark Publishing, 2001. Photo: Plat No. 93
- ↑ Yorkshire Post and Leeds Intelligencer - Monday 22 July 1901
- ↑ Shields Daily News - Thursday 21 November 1901
- ↑ Portsmouth Evening News - Friday 27 December 1901
- ↑ The Stock Exchange Year Book 1908
- ↑ The Engineer 1911/10/06 p363
- ↑ 1914 Whitakers Red Book
- ↑ 1929 British Industries Fair Advert 234 and p60
- ↑ The Times July 1 1930
- ↑ 1937 The Aeroplane Directory of the Aviation and Allied Industries
- ↑ 1937 British Industries Fair Advert p573
- ↑ [3] Competition Commission
- ↑ [4] Competition Commission
- ↑ Choosing your Television Set
- ↑ The Scotsman - Tuesday 12 October 1954
- ↑ Retford, Worksop, Isle of Axholme and Gainsborough News - Friday 28 October 1955
- ↑ 1961 Dun and Bradstreet KBE
- ↑ The Times July 11, 1963
- ↑ The Engineer of 9th February 1968 p233
- ↑ The Times, Mar 15, 1972
- ↑ The Times Sept. 18, 1974
- ↑ The Times May 15, 1975
- ↑ The Engineer 1974/04/11
- ↑ The Times Dec. 7, 1984
- ↑ The Times Mar. 2, 1988
- ↑ The Times Jan. 24, 1990
- ↑ The Times Feb. 9, 1990
- ↑ The Times Jan. 31, 1990
- ↑ The Times, Dec. 6, 1993
- [5] Wikipedia
- The Engineer of 5th April 1889 p286-7, p293, p311, p315, p324 and others
- The Ferranti Collection - abstract at National Archives of papers in the Manchester Museum of Science and Industry [6]
- Biography of Sebastian Z de Ferranti, ODNB