Dursley Pedersen Cycle Co

1896. From 'Bartleet's Bicycle Book' No. 50.

1897. Exhibit at Glasgow Museum of Transport.

c1905. Cycle No. 4. Exhibit at the Hull Street Life Museum.

• 1893 Mikael Pedersen was a Dane who arrived in Dursley, Glos in 1893 to work for R. A. Lister and Co who had licensed his design of cream separator.

• 1894 He developed an innovative form of cycle construction using lightweight multiple triangulated tubing for which he received a patent. His invention was first submitted to Messrs. Marriott and Cooper, about 1893, and was tested by their manager, Mr. A. M. H. Solomon. The experimental machine was very light, weighing only 13 lbs. #

• By 1896 Pedersen had perfected a method of jointing metal which he also patented. This frame design, combined with a novel hammock style saddle resulted in a unique concept.

• 1897 Pedersen formed a new company, the "Pedersen Cycle Frame Co. Ltd" with the financial backing of a wealthy American, Ernest Hooley, and moved into the old Pin Mill in Water Street, Dursley to produce the new cycle.

• 1898 Hooley was declared bankrupt. Pedersen found new finance from R. A. Lister and Co, who acquired the patent for the cycle, and established a new company, the Dursley Pedersen Cycle Co. to build the cycles under license. Pedersen produced further designs for military use, for ladies, in low-cost versions as well as racers and tandems.

• Pedersen invented a novel hub gear, in competition with one from Sturmey-Archer, but this initially proved unreliable.

• 1905 After a slump in sales, the Dursley Pedersen Cycle Company was taken over by R. A. Lister and Co and Co Ltd who redesigned the gear mechanism and resumed production of cycles. After this Mikael Pedersen concentrated on other areas, including a new motor cycle using his cycle frame geometry but it was not a success.

• No. 50. 'Dursley Pedersen' bicycle was built for, and ridden for many years by, A. W. Rumney, the well-known writer and tourist, by whom it was presented to the Bartleet Collection. A letter from Mr. Rumney accompanied the machine: in this he stated that it is the actual bicycle on which he rode to Jerusalem. He also toured on it in France, Italy, Sicily, Spain, Algeria, Portugal, and Scotland. It has a "Pedersen" 3-speed hub, giving gears of 50, 75, and 112.5, and 8-inch cranks. This model is the “Military" pattern, with instantly detachable front forks. Note also Mr. Rumney's ingenious home-made "cape-clip" on the fork-blade. Weight, 32 1bs.

The “Pedersen" frame employs the cantilever system, which is well known in all branches of engineering. Examination will reveal that every tubular member, comprising the frame, takes a compression stress only: thus the tubes can be made of very light gauge. In some of the earlier "Pedersens" the frame tubes were soft-soldered into the lugs.

Although they remained the principal product, the company did build a motorcycle in the same form. This had a single-cylinder engine designed by W. J. Barter.

Few of these were sold and W. J. Barter went on to design a flat-twin engine, which eventually evolved into the Douglas make.

• 1904 Motorcycle. Exhibit at Nottingham Industrial Museum. Made by Humber

• By 1917, sale of cycles by R. A. Lister and Co ceased.

• 1921 all stocks were sold to a London company who continued selling the cycle for a few years.

Sources of Information

• The British Motorcycle Directory - Over 1,100 Marques from 1888 - by Roy Bacon and Ken Hallworth. Pub: The Crowood Press 2004 ISBN 1 86126 674 X
• Mikael Pedersen and The Dursley Pedersen Cycle Company[2]