Cole, Booth and Porter
Cole, Booth & Porter of Vulcan Works, Tonge Street, Bradford
- 1880s Built three steam engines. Exhibit at Bradford Industrial Museum
- 1883 350 HP triple expansion engine at Stanley Mill, Bradford. Unusual design, having all three cylinders acting on one crank. The cylinder diameters were 10", 16" & 24". Two of the cylinders were alongside each other, while the third was below, and their piston rods acted on a common crosshead[1]
See Also
Sources of Information
- ↑ ‘The Textile Mill Engine, Part 2’ by George Watkins: Landmark Publishing Ltd.