1941 Institution of Mechanical Engineers: Index

1941.

1941.

1941.

1941.

Note: This is a sub-section of 1941 Institution of Mechanical Engineers

Vol. 145. January—June 1941

• Portrait of the President, W. A. Stanier Frontispiece
• List of Council and Officers . vii
• List of Committees of the Specialized Groups viii
• List of Committees of the Local Branches . viii
• List of Past-Presidents and Past-Vice-Presidents xi
• Annual Report of the Council for 1940 . 1
• Minutes of Proceedings of the Meeting held in February 26

• The Mechanical Requirements of the Royal National Lifeboat Institution, by Lt-Colonel P. H. Johnson, C.B.E., D.S.O., M.I.Mech.E. 30

• Discussions in London and Manchester on The Physical Aspect of Steam Generation at High Pressures and the Problem of Steam Contamination, by R. F. Davis, M.Sc. (Eng.), M.I.Mech.E. 38

• Communications on Plastic Yielding and the Fatigue of Ductile Metals: A Criterion and its Application, by R. W. Bailey, D.Sc. (Eng.), Wh.Ex., M.I.Mech.E. (Member of Council) 46

• Minutes of Proceedings of the Meeting held in March 49

• Progress in Marine Engineering as Influenced by the Classification of Ships, by S. F. Dorey, DSc., Wh.Ex., M.I.Mech.E. (Member of Council) . 51

• The Dynamic Absorber and its Application to Multi-Throw Crankshafts, by S. B. Bailey, M.Sc. (Eng.), G.I.Mech.E., and Professor C. H. Bulleid, O.B.E., M.A., M.I.Mech.E. 73

• Mechanical Engineering Practice and Development at Collieries, by Joseph Stafford, M.I Mech E. 83

• Coal Preparation and Washer Waste Treatment, by Joseph Stafford, M.I.Mech.E. 86

• Conversion of Lock-Gate Operating Machinery at Avonmouth Dock from Hydraulic to Electric Drive, by A. O. Helps, A.M.I.Mech.E. 89

• Communications on Refrigerator Performance: An Investigation into Volumetric Efficiency, by E. Giffen, Ph.D., MSc., M.I.Mech.E., and E. F. Newley, M.Sc., G.I Mech E. 95

• Communications on A Criterion for Knock in Petrol Engines, by R. C. Plumb, B.Sc. (Eng.), Ph.D., Wh.Sc., A.M.I.Mech.E., and Professor A. C. G. Egerton, M.A., Sec.R.S. 96

• Minutes of Proceedings of the Meeting held in April . 97

• The Friction and Heat Transmission Coefficients of Rough Pipes, by W. F. Cope, B.A. 99

• Heat Transmission in Surface Condensers, by Thomas Petty, A.M.I.Mech.E. 106

• The Stresses in, and the Deflexion of, Circular Flat Plates, with a Central Hole, under Normal Forces, by S. Labrow, M.Sc., A.M.I.Mech.E. 115

• The Relationship Between Stress and Strain in the Tensile Impact Test, by A. F. C. Brown, B.Sc., A.M.I.Mech.E., and N. D. G. Vincent, B.Sc. . 126

• Communication on the Static and Fatigue Torsion Strengths of Various Steels with Circular, Square, and Rectangular Sections . 135

• Discussion on Fuel Injection in Oil Engines in Relation to Combustion . 137

• Memoirs . 142

• Elections and Transferences of Members . 145

• Communication on Investigation of team Turbine Nozzle and Blading Efficiency 149

• Wave Action in Gun Run-up Spring by H. G. Woodhouse Taylor, B.A., M.I.Mech.E. 150

• Munitions Labour Supply Organization, by W. H. Denholm, M.I.Mech.E. 160

• Discussion on the Desirability of Acceptance Test Charts for Machine Tools . 171

• Communications on Fuel Economy in Petrol Engines 180

• Communications on the Physical Aspect of Steam Generation at High Pressures and the Problem of Steam Contamination . 183

• Memoirs . 188

• The Fundamental Principles of the Steam Ejector, by R. Royds, M.Sc., M.I.Mech.E., and E. Johnson, B.Sc., A.M.I.Mech.E . 193

• The Creep Recovery of a 047 per cent Carbon Steel, by A. E. Johnson, M.Sc. 210

• Discussion on Mechanical Requirements of the Royal National Lifeboat Institution . 221

• Communications on Fatigue Tests of Structural Steel Flats and Bats cut from Butt-Welded Boiler Plate . 228

• Communications on Power Transmission by Belting 231

• Memoirs 234

• Index . 240

Vol. 146. July—December '94'

• Portrait of the Secretary, Dr. H. L Guy, F.R.S., Wh.Ex., M.I.Mech.E. Frontispiece
• List of Council and Officers . vii
• List of Committees of the Specialized Groups viii
• List of Committees of the Local Branch. viii
• List of Past-Presidents and Past-Vice-Preside. • xi
• Institution Luncheon . 1

• The Regenerative Cycle: An Efficiency Basis having Special Reference to the Number of Feed Water Heating Stag., by H. S. Horsman, A.M.I.Mech.E. 5

• Communications on an Investigation into the Permissible Load-Carrying Capacity of Steel Wire Ropes for Hoisting, with Special Reference to Deep-Level Winding on the Witwatersrand Goldfields (by J. J. P. Dolan and W. G. Jackson) . 20

• Fretting Corrosion and Fatigue Strength, by E. J. Warlow-Davies, B.A., D.Phil., B.Sc. 32

• Dynamic Testing in Germany, by H. N. Cox . 39

• Memoirs . 41

• Minutes of Proceedings of the Meeting held in October . 49
• Address by the President, W. A. Stanier, M.I.Mech.E., on The Position of the Locomotive in Mechanical Engineering . 50

• Second Report of the Research Committee on High-Duty Cast Irons for General Engineering Purposes (Phosphoric High-Duty Irons) . 61

• Reports of the Research Committee on High-Duty Cast Irons for General Engineering Purposes (Austenitic and Martensitic Special-Duty Cast Irons) . 67

• Communications on the Dynamic Absorber and its Application to Multi-throw Crankshafts (by S. B. Bailey and C. H. Bulleid) 81

• Memoirs . 95

• Minutes of Proceedings of the Meeting held in November . 97

• Thomas Hawksley Lecture: A Century of Tunnelling, by W. T. Halcrow, M.I.Mech.E. 100

• Some Problems Connected with Steam Turbine Governing, by G. W. Higgs-Walker, B.A., A.M.I.Mech.E. 117

• A New Mathematical Method for the Solution of Film Lubrication Problems, by Derman G. Christopherson, D.Phil. 126

• Communications on The Stresses in, and the Deflexion of, Circular Flat Plates, with a Central Hole, under Normal Forces (by S. Labrow) . 136

• Communication on The Friction and Heat Transmission Coefficients of Rough Pipes (by W. F. Cope) . 140

• Memoirs 141

• Minutes of Proceedings of the Meetings held in December . 145

• Balancing of Locomotive Reciprocating Parts, by E. S. Cox, A.M.I.Mech.E. 148

• Hammer-Blow in Locomotives: can it not be abolished altogether?, by Sir Harold N. Colam, B:A., M.inst.C.E., and Major J. D. Watson, ILE., B.Sc. (Eng.), Assoc.M. Inst.C.E. (abridged) . 163

• The Axial Vibration of Diesel Engine Crankshafts, by R. Poole . 167

• Communications on Wave Action in Gun Run-up Springs (by H. G. Woodhouse Taylor) . 183

• Communications on Creep Recovery of a 0.17 per cent Carbon Steel (by A. E. Johnson) . 187

• Memoirs . 188

• Bench and Field Tests of Vehicle Gas Producer Plant as Applied to Farm Tractors, by Professor A. T. Bowden, Ph.D., B.Sc., A.M.I.Mech.E., E. E. Freeth, B.E., S.I.Mech.E., and A. D. Rutherford . . 193

• The Properties and Mode of Rupture of a Molybdenum and a Molybdenum-Vanadium Steel, judged from Prolonged Creep Tests to Fracture, by H. J. Tapsell, A.M.I.Mech.E., C. A. Bristow, B.Sc., and C. H. M. Jenkins, D.Sc. 208

• Communications on The Fundamental Principles of the Steam Ejector (by R. Royds and E. Johnson) 223

• Index 236

See Also

Loading...