Arab Motor Co
The Arab was a high performance English automobile designed by Reid Railton and manufactured in Letchworth, Hertfordshire, between 1926 and 1928.
The car came about following discussions between J. G. Parry-Thomas, design engineer at Leyland Motors, Reid Railton, his assistant and Henry Spurrier, chairman of Leyland Motors.
Leyland had made 50 four cylinder engine blocks intended to be used in fast delivery vans but the project was not proceeded with. The three discussed what to do with the blocks and the building of a 2 litre sporting car was agreed. A prototype was built using an Enfield-Allday and the car taken to Brooklands for the 1924 Easter Meeting. The engine had an overhead camshaft with the same unusual valve springing using leaf springs as those found on Parry Thomas's Leyland Eight. Drive was to the rear wheels via a Moss 4 speed gearbox and ENV spiral bevel rear axle. It was one of the first English cars to use an electric fuel pump.
Production was started in 1926 at the Letchworth works of two variants, a low chassis sporting model and a high chassis touring type. Two and four seater bodies were available on the high chassis at £525 and probably only the two seater on the low chassis at £550.
Parry Thomas died in March 1927 attempting to break the World Land Speed Record in his car Babs, and with his death Railton lost interest in the Arab and the Letchworth works closed after only about 6 or 7 cars were made. The remaining components were bought by Thomson and Taylor based at Brooklands and a few more cars were assembled.
The car was an impressive performer with the two-seater high chassis good for 80 mph, and the Super Sports was said to have been capable of going 90 mph. One high chassis is known to have been supercharged and is said to have achieved 105 mph.
Two cars are known to survive, both low chassis.
See Also
Sources of Information
- [1] Wikipedia