1970 Institution of Mechanical Engineers: Index

Note: This is a sub-section of the 1970 Institution of Mechanical Engineers

Volume 185

• Automobile Division Chairman's Address. Some problems and developments in the field of automotive lubrication - A. Towle

• Tribology Group Chairman's Address. Piston ring scuffing— a broad survey of problems and practice - M. J. Neale
• Discussion

• Systems of engineering organization - S. H. Wearne
• Discussion

• Presidential Address. Educating engineers - J. L. M. Morrison

• A solution using the superposition technique for externally pressurized multi-recess journal bearings including hydrodynamic effects - J. P. O'Donoghue, C. J. Hooke, and W. B. Rowe

• An analysis of the control mechanism used in variable-delivery hydraulic pumps - W. L. Green and T. R. Crossley
• Discussion

• Nominated Lecture. The development of inventions - T. A. Coombs
• Discussion

• The teaching of machine-tool technology at university level - F. Koenigsberger
• Discussion

• The development of an electronically controlled petrol injection system - B. H. Croft

• Servo-valve controlled isolation systems - J. I. Soliman and D. Tajer-Ardabili

• A new computation model of combustion in the spark-ignition engine – W. J. D. Annand
• Discussion

• Disc brake pad wear evaluation - M. W. Moore and B. Walton
• Discussion

• The 2-stage rotary engine— a new concept in diesel power - F. Feller
• Discussion

• Parsons Memorial Lecture. Designing warships for a cost-effective life - R. G. Raper

• On-load cleaning of steam turbine blading - F. G. Keogh

• The dynamic transfer characteristics of reciprocating engines - D. E. Bowns
• Discussion

• Spatial variation of heat transfer to pistons and liners of some medium speed diesel engines - W. J. Seale and D. H. C. Taylor
• Discussion

• A review of liquid cooling of high-temperature gas-turbine rotor blades - F. J. Bayley and B. W. Martin
• Discussion

• Pre-service component testing of steam power and process plant - A. J. Morton
• Discussion

• The Forty-third Thomas Lowe Gray Lecture. The use and abuse of materials in ocean engineering - D. Birchon

• The development of a high-performance motor-cycle engine - G. P. Blair and M. B. Johnston
• Discussion

• Extrapolation of creep strain and rupture properties of 1/2 per cent Cr, 1/2 per cent Mo, 1/4 per cent V pipe steel - * W. M. Cummings and R. H. King
• Discussion

• James Clayton Lecture. Wind effects on structures - C. Scruton

• Comparative dynamic acceptance tests for machine tools applied to horizontal milling machines - M. M. Sadek and S. A. Tobias
• Discussion

• Cumulative damage in push—pull fatigue of fillet-welded mild steel plate subjected to narrow band random loading - D. J. White and J. Lewszuk
• Discussion

• Ball race performance. Imperfections in vacuum remelted precision steel balls which affect ball race performance - D. J. Haines

• Ball race performance. Observations of ball to track contact angles and inclination of ball rolling axis in an angular contact ball race - D. J. Haines

• Ball race performance. The behaviour of lubricated steel balls under close-conformity aero-engine mainshaft ball race conditions - D. J. Haines

• Ball race performance. A new design of angular contact ball race - D. J. Haines and M. J. Edmonds
• Discussion

• Condensation phenomena in high speed flow of steam - B. A. Campbell and F. Bakhtar
• Discussion

• Performance estimation of axial flow turbines - H. R. M. Craig and H. J. A. Cox
• Discussion

• Design of large diesels for operational reliability - R. Bertodo
• Discussion

• The Seventh John Player Lecture. The strength of steel - H. M. Finniston

• James Clayton Lecture. The expansion of the fisheries: new applications of mechanical power in man's oldest industry - * G. C. Eddie

• Annual Report of the Council for the Year 1970
• Report of the Annual Meeting held on 26th May 1971

• The effect of extraneous factors on the development of test methods - M. A. W. Hall

• A laboratory pneumatic tyre testing rig - B. D. A. Phillips
• Discussion

• Grinding and abrasive wear - T. C. Buttery and J. F. Archard
• Discussion

• Design of active suspensions - A. G. Thompson
• Discussion

• Overhaul policies for mechanical equipment - N. A. J. Hastings and D. W. Thomas
• Discussion

• The effect of the method of gas admission on performance of a spark-ignition gas engine - G. P. Mitchell and N. D. Whitehouse
• Discussion

• The measurement of air velocity in a motored internal combustion engine using a hot-wire anemometer - H. Hassan and J. C. Dent
• Discussion

• Plane strain compression of anisotropic sheet metal - M. Taghvaipour and P. B. Mellor
• Discussion

• Some design and development considerations for an industrial classification system - G. H. Middle, R. Connolly, and R. H. Thornley
• Discussion

• The education of professional mechanical engineers - A. Brown
• Discussion

• The contact of two nominally flat rough surfaces - J. A. Greenwood and j. H. Tripp
• Discussion

• The influence of surface roughness on the capacitive measurement of film thickness in elastohydrodynamic contacts - W. E. ten Napel and R. Bosnia
• Discussion

• Transient torque of steam turbines in power systems - G. Sheard and F. J. Evans
• Discussion

• Effect of specimen size and preparation on the fatigue strength of a plain carbon steel tested on rotating bending and in torsion - D. A. Kelly and J. L. M. Morrison
• Discussion

• The application of finite element techniques to the analysis of an automobile structure. Static analysis of an automobile chassis frame - R. Ali, J. L. Hedges, and B. Mills

• The application of finite element techniques to the analysis of an automobile structure. Stress analysis of an automobile chassis frame - J. L. Hedges, C. C. Norville, and O. Gurdogan

• The application of finite element techniques to the analysis of an automobile structure. Dynamic analysis of an automobile chassis frame - R. Ali, J. L. Hedges, and B. Mills
• Discussion

• The effect of heat treatment and decarburization on the fretting fatigue behaviour of a 0.7 per cent carbon steel - R. B. Waterhouse and D. E. Taylor
• Discussion

• A new unified approach to surface metrology - R. C. Spragg and D. J. Whitehouse
• Discussion

• Effect of pins with flats and resin-bonded polytetrafluorethylene coatings on the fatigue strength of large pinned connections made from alloy steel FV520B - D. J. White

• Effects of tilt on the performance of hydrostatic thrust pads - R. B. Howarth
• Discussion

• Analogue investigation of the inertia-coupled free-piston engine - A. Moore
• Discussion

• Kinematics of compound differential mechanisms - S. Molian
• Discussion

• An experimental investigation of the influence of strain-rate and temperature on the flow stress properties of a low carbon steel using a machining test - M. G. Stevenson and P. L. B. Oxley
• Discussion

• The design and performance of high-pressure injectors as gas jet boosters - M. L. Hoggarth
• Discussion

• Chatter in gear bobbing - R. G. Hannam and C. Andrew
• Discussion

• The Fifty-seventh Thomas Hawksley Lecture. Carbon fibres for engineering Applications - W. Watt and L. N. Phillips

• Cracking in cast iron diesel engine cylinder heads - L. W. L. Smith, H. T. Angus, and A. D. Lamb
• Discussion

• The enhancement of turbulent diffusion in a parallel-wall duct - C. Betts and A. P. Hatton
• Discussion

• Transient response of a time-optimized hydraulic servomechanism operating under cavitation conditions - P. N. Nikiforuk, J. N. Wilson, and R. M. Lepp
• Discussion

• Summer Meeting paper. City planning and engineering: energy, communications, and the environment - N. Borg

• Knock limits and performance of some gaseous fuels in a supercharged spark-ignition engine - W. J. D. Annand and S. J. Sulaintan
• Discussion

• Elastic—plastic computations as a basis for design charts for torispherical pressure
• vessel ends - C. H. A. Townley, G. E. Findlay, A. M. Goodman, and P. Stanley
• Discussion

• Automobile Division Chairman's Address. The art and science of selecting and solving research and development problems - R. C. Parker

• Mechanical handling aspects of the Tilbury grain terminal - J. B. Griffith and D. W. R. Addicott
• Discussion

• Presidential Address. Design: the fabric of engineering - R. L. Lickley

• Possible flow regimes of adiabatic one-dimensional compressible fluid flow with friction in convergent and divergent ducts - A. R. Showman and C. E. Garcia
• Discussion

• Combustion problems in the Petro-forge - A. F. ArOmar and R. Bakhtar
• Discussion

• Transpiration cooled turbines - F. J. Bayley and A. B. Turner
• Discussion

• Gas turbines with heat exchanger and water injection in the compressed air - N. Gasparovic and J. G. Hellemans
• Discussion

• Heat transfer in compression-ignition engines. Heat transfer in a quiescent chamber diesel engine - N. D. Whitehouse

• Heat transfer in compression-ignition engines. Instantaneous heat transfer rates to the cylinder head surface of a small compression-ignition engine - W. J. D. Annand and T. H. Ma
• Discussion

• The Fifty-eighth Thomas Hawksley Lecture. The design of Alaskan North Slope production wells - R. D. Koch

• Engineering aspects of tyre testing - J. A. Turley
• Discussion

• Some calculations to assess the effect of spin on the tractive capacity of rolling contact drives - S. Y. Poon
• Discussion

• James Clayton Lecture. Some early experiences of mechanical vibration in marine engine systems - W. Ker Wilson

• Performance of inward radial flow turbines under unsteady flow conditions with full and partial admission - F. J. Wallace and,. Miles
• Discussion

• Predictive validity of examinations in an undergraduate course in mechanical
• engineering - R. R. Platt
• Discussion

• A study of the performance of a non-linear resonant vibratory conveyor - G. G. Leckie and A. D. S. Barr
• Discussion

• A study of the hot rolling of thick flat slabs - L. G. M. Sparling and R. A. L. Willows
• Discussion

• Unsteady heat transfer in a motored I.C. engine cylinder - H. Hassan
• Discussion

• Stress—strain curves for oxygen-free high conductivity copper at shear strain rates of up to 10^3 s -1 - * K. Bitans and P. W. Whitton
• Discussion

• The starved lubrication of cylinders in line contact - P. E. Wolveridge, K. P. Baglin, and j. F. Archard
• Discussion

• The effect of dwell time on die wear in high speed hot forging - S. M. J. Ali, B. W. Rooks, and S. A. Tobias
• Discussion

• Address by the Chairman of the Greater London Branch. Higher technological education: the other half - J. Osborne-Moss

• Report of Special Meeting on 22nd June 1971
• Report of Special Meeting on 1st December 1971
• Index of authors and contributors
• Subject index
• Index of authors, papers, and synopses

See Also

Loading...